Universal Adapter for HG Indicator Tips

The itpstyli HG Adapter works with height gages that utilize either a 6 mm or 8 mm mounting stem that slides into the indicator tip assembly. The M5 internal thread of the adapter allows you to choose from a wide selection of sphere sizes and stem lengths. An M5 threaded stylus is screwed into the adapter and the combined unit simply slides into the indicator holder assembly.

This will help reduce costs, improve delivery speed and take advantage of the wide selection of CMM quality styli for your height gage replacement tips. A 3.0 mm by 55 mm long spherical height gage probing element from one OEM costs $125. itpstyli has a ruby tipped, 3.0 mm by 30.0 mm probe for less than $50. That’s a 50% savings AFTER purchasing the inexpensive adapter. Be sure to select the correct shank size as described in the below. Stylus sold separately.

Height Gage Adapter with M5 Ruby-Stylus
Universal Height Gage Adapters
Designed to work with the majority of Height Gages, the Universal adapter allow the use of conventional CMM styli.
  • 6.0 mm stem fits most Brown & Sharpe and Tessa probe holders.
  • Overall Length of 38 mm with 6.0 mm diameter stem
  • M5 female threaded base accepts wide range of M5 spherical probe tips
Height Gage Adapter
M5 Height Gage Adapter 6.0 mm - $19.00
M5 Height Gage Adapter 6mm Drawing
HG M5 06 038
  • 8.0 mm shaft fits most Mahr Federal and Mitutoyo, and Trimos probe holders.
  • Overall Length of 38 mm with 8.0 mm diameter stem
  • M5 female thread base accepts a wide range of M5 spherical probe tips
Height Gage Adapter
M5 Height Gage Adapter 8.0 mm - $19.00
M5 Height Gage Adapter 8mm Drawing
HG M5 08 038